Cut the corner of a countertop or trim

El comando Bisel permite recortar las esquinas de un elemento de superficie, como encimeras y ajustes.

Para recortar esquinas en elementos lineales, como molduras, primero debe combinar sus secciones. See Combine linear item sections for more information.

Siga los pasos siguientes para usar el comando Bisel:

1. Point to the surface item that you want to bevel, right-click, and select Edit Shape.
   
   

2. Select a corner point, right-click, and select Bevel from the Point Menu.
   
   

3. Mueva el puntero hacia el interior de la sección y haga clic para establecer.
   
   

    

   Curve the corner

   The Radius Corner command allows you to change right-angled corners into radius corners on surface items, such as countertops and soffits.

   Para añadir esquinas de radio a elementos lineales, como molduras, primero debe combinar sus secciones. See Combine linear item sections for more information.

   Complete the following steps to use the Radius Corner command:

   1. Point to the surface item that you want to add a radius corner to, right-click, and select Edit Shape.
      
      

   2. Select a corner point, right-click, and select Radius Corner from the Point Menu.
      
      

   3. Move the pointer toward the inside of the section and click to set, or type values in the Radius field of the Placement box and press ENTER.
      
      Here is a reshaped countertop after using the Radius Corner option.
      
      

    

   Recortar la esquina de encimera

   El comando Bisel permite recortar la esquina de una encimera.

   Siga los pasos siguientes para usar el comando Bisel:

   1. Select a countertop point, right-click, and select Bevel from the Point Menu.
      
      

   2. Apunte al interior de la encimera y haga clic para fijarlo.