Drawing collinear walls can be useful, for example, if you want to apply a different finish to a section of a wall through the Wall Properties.
Siga los pasos siguientes para dibujar una pared colineal:
-
In the ROOM LAYOUT ribbon, click the wall Continuous button or construction line Continuous button.
-
Haga clic en el área de planta para iniciar la primera sección de la pared.
-
Extend the wall to the required length and click to confirm, or type in values in the Placement box and press ENTER.
-
Para dibujar una pared colineal (segunda sección), mueva el puntero y mire el cuadro Ubicación. Bring the angle at 180 degrees so that the walls are collinear and then click to confirm the length and angle.
-
To add another wall section, repeat steps 3 and 4.
-
To stop adding walls, press the ESC key.
Note: If you prefer to draw walls/construction lines using 90-degree angles, select the Draw walls using 90 degree angles check box in the Wall/construction line settings of the Preferences dialog box. Then, follow the instructions in Draw connected walls using 90-degree angles.