WARNING: Before modifying a backsplash, make sure you are completely finished editing any countertop that touches any of the backsplash lines. Si edita un copete y luego cambia una encimera que lo toca, el copete se restablecerá a su valor predeterminado.
Siga los pasos siguientes para modificar un copete:
-
Display the Elevation area of the wall where the backsplash is located.
-
Complete cualquiera de las siguientes acciones:
-
To edit a backsplash, point to the backsplash, right-click, and select Surface Item.
-
Para editar una línea de copete, seleccione la línea, haga clic con el botón secundario y seleccione un comando en el menú Línea. Los comandos línea para un copete funcionan de la misma manera que los comandos línea para una encimera.
-
Para editar un punto de Copete, seleccione el punto, haga clic con el botón derecho y seleccione un comando en el menú Punto. Los comandos Punto para un copete funcionan de la misma manera que los comandos
-
To edit a cut line, point to the cut line and right-click, point to Cut Line, and select a command from the Cut Line menu. Los comandos de línea de corte para un copete funcionan de la misma manera que los comandos de línea de corte para una encimera. This menu is only available when you edit a Stone material backsplash cut line that is added manually.
-
To edit an arc, point to the arched line and right-click, point to Arc, and select a command from the Arc menu. The Arc commands for a backsplash work the same way as the arc commands for a countertop.
-
To edit a section, point to the backsplash and right-click, point to the Section #, and select a command from the Section # menu. The Section commands for a backsplash work the same way as the section commands for a countertop.
-
Note: After modifying a stone backsplash, if the edited backsplash cannot be manufactured (exceeds the slab size), a crosshatched pattern appears. Deberá añadir un corte en este caso.