El comando Girar permite girar lineales o elementos de superficie, como molduras y ajustes.
Siga los pasos siguientes para usar el comando Girar:
-
Point to the item that to you want to rotate, right-click, and select Edit Shape.
-
Point to the inside surface or near the linear item, right-click, and select Rotate from the Item Menu.
-
Seleccione el punto que desea utilizar como centro de rotación.
-
Rotate the item to the new angle and click to set it, or type the value in the Placement Box and press ENTER.
To rotate a section follow the steps below using the Rotate command:
-
Señale el elemento que desea modificar, haga clic derecho y seleccione Editar forma.
-
Point near a line of a linear item or inside a section of a surface item, right-click, and select Rotate from the Section Menu.
-
Seleccione el punto que desea utilizar como centro de rotación.
-
Rotate the section to the new angle and click to set, or type the value in the Placement Box and press ENTER.
Tip: To rotate multiple sections at once, select the item and then double-click to display rotation handles. Seleccione un controlador de rotación y gire el elemento al nuevo ángulo.
El comando Girar permite girar un punto en superficies o lineales, como encimeras y zócalos.
Siga los pasos siguientes para usar el comando Girar:
-
Point to the surface or linear item that you want to modify, right-click, and select Edit Shape.
-
Select the point to rotate, right-click, and select Rotate from the Point Menu.
-
Seleccione un segundo punto para indicar el centro de rotación.
-
Move the pointer to rotate the point and click to set the new position and shape, or type an angle in the Placement Box and press ENTER.