In this article we look at:
Voltear un Corte
El comando Voltear corte le permite mover un solo corte a su posición opuesta, al igual que el comando espejo. El comando Voltear corte puede eliminar cortes de encimera innecesarios, lo que reduce los costes.
Complete the following steps to flip a single bull nose cut:
-
Point to the countertop with the single corner cut, right-click, and select Edit Shape.
-
Apunte al corte chaflán y clic-derecho.
-
Point to Single Bull Nose Cut in the pop-up menu, and select and Flip Cut from the Cut Menu.
Mover un Corte
El comando Mover permite mover el corte en una encimera. Puede utilizar este comando cuando los cortes realizados automáticamente por la característica de diseño automático no satisfagan sus necesidades.
Siga los pasos siguientes para usar el comando Mover:
-
Point to the surface or linear item with the cut that you want to move, right-click, and select Edit Shape.
-
Apunte a un corte y clic-derecho.
-
Point to the cut type in the pop-up menu, and select Move from the Cut Menu.
-
Mueva el corte a la nueva ubicación y haga clic para establecer la nueva posición.
Girar un corte
El comando Girar permite girar el corte en una encimera. You might use this command when the cuts that were made automatically, by the auto design feature, do not meet your needs.
Siga los pasos siguientes para usar el comando Girar:
-
Point to the surface or linear item that you want to modify, right-click, and select Edit Shape.
-
Coloque el cursor sobre el corte y haga clic con el botón derecho.
-
Point to the cut type in the pop-up menu, and select Rotate from the Cut Menu.
-
Seleccione un punto final del corte para indicar el centro de rotación.
-
Gire el corte a la nueva posición y haga clic para establecer.
Eliminar un Corte
El comando Eliminar permite quitar un corte de una encimera.
Siga los pasos siguientes para usar el comando Eliminar:
-
Señale la superficie o el elemento lineal que desea modificar, haga clic derecho y seleccione Editar forma.
-
Point to a cut, right-click, and select Delete.
Cortes iniciales y finales
Corte inicial y final son dos puntos de corte que muestran el comienzo y el final de un canto de encimera, copete, molduras varias (lineales que no se colocan sobre un mueble, como una cornisa).
When these cuts are not at a 90-degree angle, an extra charge can be assigned through Assign specific.
Estos cortes se utilizan en elementos lineales solamente.