Please follow the steps below to add support under the countertop.
Note: Because corbels are considered wall items, they have the alignment of a wall cabinet.
- Select the Room Catalog in the Local Browser.
- In the Quick Search bar type CORB and select the CORB-ACAN-M.
- Drag & Drop the CORB on the back placement zone of the island and snap it to the corner of the island.
- Right-click the CORB and move it in/out to place it in line with the backside of the panel.
- Add an Elevation Area of the back placement zone.
- Right-click on the CORB to move it up/down to lower it to the same height as the cabinet.
- On the elevation view, right-click on the CORB and select Duplicate.
- Left-click on the back of the island and drag the CORB to the right end of the back of the island.
- Repeat the above steps to add an additional CORB between the two you’ve placed.
- Once the 3rd CORB is placed, center it between the other two by right-clicking on the CORB and selecting center. Left-click once on the CORB to the left and double click on the CORB to the right. This will center the middle CORB between the other two.
- Save the design.
Related articles