Complete the following steps to add a sink:
-
Click the Add button.
-
Select whether the sink is provided by the countertop manufacturer or by the customer.
Note! Different options are offered and different charges are calculated depending on who provides the sink. -
Select the dimensions of the sink base cabinet.
-
If available, select Undermount or Drop-in.
Note: The available options vary depending on the manufacturer. -
Select a sink model.
-
If the sink is provided by the customer, select Cast Iron or Non Cast Iron in the Select sink material pane.
-
If the sink is Undermount and options appear in the Select sink cutout edge list, select the cutout edge.
-
Click Next.
-
If you are using Solid Surface countertops and drain boards are required for the sink, select the location of the drain board and specify the drain board width(s). Click Next.
Note: Drain boards are lateral grooves on the countertop that drain liquid toward the sink. Drain boards are only sold by specific manufacturers. They are not represented graphically on designs, but are priced on reports. -
To add another sink to this countertop section, click the Add button and return to step 2 to continue your selections; otherwise, click Next.
-
To delete a sink from the list, select it and click the Delete button.
-
To change the selection of an added sink, select it and click the Edit button.