Complete the following steps to edit the attributes of a countertop:
-
To return to the wizard to edit a countertop, point to the countertop on the Floor Plan, right-click, and select Wizard. (You may need to choose the countertop's label and Surface item first.)
-
In the left column of the Countertop Wizard, select the portion of the countertop that you want to modify.
Click here for instructions on editing components added through the Countertop wizard.
Notes:
-
Any modification that you add to the countertop may require that you validate other steps. For example, if you substitute the material, you need to reselect a manufacturer and follow the remaining steps from there. If you substitute the manufacturer, you need to reselect a color and follow the remaining steps from there.
-
Previously entered dimensions are retained unless the maximum or minimum dimensions defined by the material are different. In that case, you are asked to redefine some information.
-
Countertop dimensions need to be validated against material-specific data to ensure that the relationships are accurate (e.g., seam location relative to material requirements, seam locations relative to cut out locations, edge details, corner treatments, etc).