The countertop wizard takes you through all the stages of creating countertops for your design. This user guide will detail all the different steps.
Launch the wizard
-
Click Countertop Wizard
in the ITEMS ribbon.
-
The Countertop Wizard is shown in the following screenshot. The left pane shows all the information that you have entered since you started the design session. You can change all of these selections during the design session, but if you do so and a subsequent selection is no longer valid, you will need to reselect these settings from the list of available options.
-
You can double click on multiple choice options and enter values in others and click OK.
User Guide contents
Step 1: Select a countertop material
Step 3: Select a countertop material color
Step 4: Select a countertop thickness
Step 5: Auto-design countertops or select a countertop shape
Step 6: Select backsplash options
Step 8: Select the sink information
Step 9: Select a cooking element
Step 12: Select additional options
Step 13: Choose a location for heat rods
Step 14: Place sinks, appliances and obstacles
Step 15: Choose the location of the backsplashes
Step 16: Specify custom backsplashes
Step 17: Choose the location of the appliance edges