Move a cutout

The Move command allows you to move a cutout from its current location. You can move a cutout vertically, horizontally, or diagonally.

Complete the following steps to use the Move command:

1. Point to the surface item that you want to modify, right-click, and select Edit Shape.
   
   

2. Point inside a cutout, right-click, and select Move from the Cutout Menu.
   
   

3. Select a line to indicate the direction that you wish to move. Selecting a horizontal line moves the cutout horizontally; selecting a vertical line moves the cutout vertically; and selecting a diagonal line moves the cutout diagonally.
   
   

4. Move the cutout to the new location and click to set the position, or type values in the Placement box and press ENTER.

Rotate a Cutout

The Rotate command allows you to rotate a sink cutout. You might use this command to better complement the geometrical design of the kitchen.

Complete the following steps to use the Rotate command:

1. Point to the surface item that you want to modify, right-click, and select Edit Shape.
   
   

2. Point inside the cutout, right-click, and select Rotate from the Cutout Menu.
   
   

3. Select a point to indicate the rotation center.
   
   

4. Rotate the cutout to the new position and click to set the position, or type an angle in the Placement box and press ENTER.