Use the Open tab in the Global Attributes dialog box to set the opening for doors and drawers.
Click the Global Attributes icon in the ITEMS ribbon.
NOTE: If you see an error Items from this catalog must be switched to the latest cloud catalog, see Update outdated catalog items.
See the following topics for information on opening doors and drawers:
Open drawers
To open all top level drawers, use the arrows in the Open drawer (1) line to specify the number of inches you want the drawers to be opened. Use the arrows on the left for one-inch increments; use the arrows on the right for fractions.
To open all second, third, and fourth level drawers, select values in the Open drawer (2), Open drawer (3), and Open drawer (4) lines. For example, specify an 8-inch opening on Open drawer (2) and a 10-inch opening on Open drawer (3) so that the drawer openings are staggered.
Open doors
Complete the following steps to open all cabinet doors on your design:
-
Click the Angle Opening button
in the Open door (1) line.
An angle definition window opens and displays a graphical representation of the door angle opening. -
The black line represents the angle. Select the black line and move it until you reach the required opening angle, then click outside the angle definition window to confirm the setting.
The angle opening value is shown in the Open door (1) field.
Complete the following steps to open back doors on peninsula cabinets and the second part of piano-hinged doors (door pull):
-
Click the Angle Opening button
in the Open door (2) line.
-
Select the black line and move it until you reach the required opening angle, then click outside the angle definition window to confirm the setting.
The angle opening value is shown in the Open door (2) field.
Open cabinets with factory-added items
To open the doors/drawers of cabinets with factory-added items, such as roll-out shelves and spice racks, select the Open item w/acc check box in the Open tab of the Attributes dialog box.