Print the current work area

To... (options appear according to work area)

Do the following...

Select a printer

Select a printer from the Name list. Click the Properties button to change the properties of the selected printer.

Print all of the Floor Plan views accessed during this session (Display tabs you clicked on), as well as all of the Elevation views that were added

In the Range pane, select All ...

Print the current Floor Plan and, if added, the current Elevation

In the Range pane, select Current ....

Select which Floor Plan and Elevation view to print

In the Range pane, select Selection. Click here for instructions on using the Display Tab Selections dialog box.

Choose the number of copies to print

Enter a number in the Number of copies field.

Print only the portion of the design seen on the screen

In the Print Area pane, select Display; otherwise, leave Entire design selected.

Print according to a specific scale (from the center of the design)

In the Print Scale pane, select Ratio and enter a scale size (in imperial inches or in metric millimeters).

If you select Fit to page, the Floor Plan/Elevation will occupy the maximum available space on paper.

Note! If the ratio selected is too large to print on one page, a print preview of the Floor Plan/Elevation displays. Use the Mover button to select a specific region or to change the ratio.

Print rendered Floor Plans (2D top views) and Elevations with dimensions, notes, symbols and item labels

In the Print Mode list, choose between Work Area, Wireframe, Hidden, Color, Texture, Color with Edges, and Texture with Edges. The Work Area mode prints nonrendered Floor Plans/Elevations.

If you selected EZ Render (available exclusively on Design Live application), Color and texture modes are carried out automatically by the system.