How to add and stack an adjustable shelf in the Closet add-on

To add an adjustable shelf

Complete the following steps: 

1. Make sure the Area Snap mode is deactivated at the bottom-right of the program to avoid snapping to predefined area settings and take full advantage of the anchoring capability.
   
   
   
   
2. To add a shelf in Section 1, click on the Closets icon
   
   
3. Type SHFA in the Quick Search area.
   
   
4. Double-click on SHFA Adjustable Shelf in the dialog.
   
   
5. Click in Section 1 in the elevation area.
   
   
   
   
6. Move the shelf it to the required height within the section and click to set. 
   The width of the adjustable shelve is automatically adjusted.
   
   
7. Select Close from the Closet window.
   
   
8. Select the newly placed shelf and delete it.
   
   

To Stack Adjustable Shelves

To stack shelves quickly every 8", use the Placement Tool as follows:

1. Select FLEX_C in the Drag & Drop list.

2. Type SHFA in the Quick Search area of the Drag & Drop list.

3. Click on SHFA Adjustable Shelf.

4. Type 8 in the Offset field of the Place tab in the Placement Tool.

5. Click on SHFF in Section 1 (handles must appear at the ends).
 
6. Click the up arrow in the Placement Tool. 

Result:


 
Design automatically detects the nearest placement holes available for the shelves.

7. Stack shelves at every 8" in section 4 using the same process.

8. Save the design (CTRL+S).