How to configure Closet options

You can configure closet options in the Closet add-on with Design.  To configure closet options, complete the following steps: 

1. Before configuring the closet options of an item, edit the attributes of the V BOX, change these attributes and click OK.
   
   
2. To select multiple items with Select Region, click and hold the mouse button where you see the  in the picture below.
   
   
   
   
3. Drag the mouse diagonally towards the bottom-left to draw a rectangle around the four (4) SHFA shelves in Section 4, then release the mouse button here.
   
   
4. Press the DELETE key. Only the four shelves should be deleted. Press CTRL+Z and start over if more items were deleted.
   
   
5. Drag and drop two (2) SHFF fixed shelves in Section 4 (one in the middle and one at the top).
   
   
   
   
6. Drag and drop two (2) RODU rods beneath the shelves in Section 4.
   
   
   
   
7. Save the design (CTRL+S).

Configure the closet options for a single item

1. To view and specify the options of a single item, for example a rod, right-click on one of the rods, select RODO (RODU), then select Features and Options.
   
   
2. To choose a rod type, select Rod Type on the bottom-left section and select the desired type on the right-hand side.
   
   
3. To also choose a rod color, select Accessory Color on the bottom-left section and select the desired color on the right-hand side. Then click OK.
   
   

Configure the closet options for multiple items

To configure the closet option(s) for:

• A single item: Click on a User Code in the top pane of the dialog.
  
  

• Multiple items randomly: Press the CTRL key and click on the required items, then release the CTRL key.
  
  

• Multiple items in a range: Press the SHIFT key, click on the first item, click on the last item to configure, then release the SHIFT key.

1. To assign the same options to all the rods in the closet, in addition to other closet options for other parts, press the CTRL+A keys to select all the items in the design, then click the Options icon from the ITEMS tab of the ribbon.
   
   
   
   
2. In the bottom pane of the dialog, click on options that require confirmation symbolized with a red question mark in the Options Code column.
   Note: You can also select an option from the right-hand side pane.
   
   
3. Repeat these steps for all options with red question marks.
   
   
4. Click OK in the Features and Options dialog.
   
   
5. Save the design (CTRL+S).