How to place and stack drawers in the Closet add-on

You can place and stack drawers in the Closet add-on with Design.


To place standard drawers, baskets, special racks, etc., you must first change the width of a section to a standard value such as 24''.

1. In the Attributes of the PNLS, change the User Defined Section width of Sections 2 to 24 and click OK.
   Note: Design automatically adjusts the width of parts in sections 1, 3 and 4.
   
   
2. While pressing the CTRL key to select the 2 DRWC9 drawers in Section 2.
   
   
3. Press the DELETE key.
   
   
4. Use the Placement Tool to place two DRWS9 where the DRWC9 used to be in Section 2.
   Note: Use the CTRL key to facilitate the placement of the drawers.
   
   
5. Save the design (CTRL+S).

Stack Custom Drawers in Section 2

1. Click on SHFF at the bottom of section 2 (handles must appear at the ends).
   
   
2. Type 0 in the Offset field of the Place tab in the Placement Tool.
   
   
3. Type DRWC in the Quick Search area of the Drag & Drop list.
   
   
4. Click on DRWC9 in the Drag & Drop list.
   
   
5. Click the up arrow twice in the Placement Tool. 
   
   
6. Click on DRWC6 in the Drag & Drop list.
   
   
7. Click the up arrow twice in the Placement Tool.
   
   
8. Save the design (CTRL+S).

Stack Custom Drawers in Section 3

1. Click once on the right arrow in the Placement Tool. 
   
   
2. Click once on the down arrow in the Placement Tool. 
   
   
3. Select DRWC9 in the Drag & Drop list.
   
   
4. Click twice on the down arrow in the Placement Tool. 
   
   
5. Save the design (CTRL+S).
   

   
   Add Fixed Shelves that Snap to Drawers

1. Type SHFFD in the Quick Search area of the Drag & Drop list.
   
   
2. Click on SHFFD in the Drag & Drop list.
   
   
3. Select the top drawer in Section 2.
    
4. Click the up arrow. 
   Note: The width of the shelf is automatically adjusted.
   
   
5. Repeat steps 3 and 4 for Section 3.
    
6. Save the design (CTRL+S).