Duplicate shelves and panels in the closet add-on

You can duplicate shelves and panels in the Closet add-on with Design.

To duplicate shelves
 

1. Right-click on the third shelf in Section 1 and choose Duplicate.
   
   
2. Click in Section 2, and click to set.
   
   
3. Repeat the previous steps to duplicate the same shelf in Section 3 and at the same height.
   
   
4. Save the design (CTRL+S).

To duplicate panels:

1. In the Attributes of the PNLS, change the section type of Section 1 to Floor Mounted and click OK.
   
   Result:
   
   
   
2. Try to drag and drop a DRWC9 in Section 1 via the elevation area. This should not work because the drawer has an overlay front and because Sections 1 and 2 have different depths, therefore the overlay front is colliding in the panel of Section 2.
   
   
3. To fix this problem, you must first double the panels. Type PNLR in the Quick Search area of the Drag & Drop list.
   
   
4. Drag and drop the PNLR in Section 1 near the drawers.
   Design automatically redistributes sections evenly.
   
   
5. Click on SHFF at the bottom of Section 1 (handles must appear at the ends).
   
   
6. Type 0 in the Offset field of the Place tab in the Placement Tool.
   
   
7. Type DRWC in the Quick Search area of the Drag & Drop list.
   
   
8. Click on DRWC9 in the Drag & Drop list.
   
   
9. Click the up arrow once in the Placement Tool.
   
   
10. Save the design (CTRL+S).