The Vertex file can be imported into Design using the .xml file exported from the software you are using, for example Rendr.
This is an architecture layout which will include importing Walls, Doors, Windows and, some basic items into Design. The xml file will determine the walls position and dimension.
View the detailed node description in a pdf here:
See below for the items that are imported into Design
Doors
Short description of item |
Location of the insertion point in Design |
Code- Item type identified in the xml file |
Image |
Interior Door | Back left | Common.Door.Interior.Standard.Single | |
Doorway, a pass-thru, a frame without door | Back left | Common.Door.Interior.Passthru | |
Swing door, an interior door that can open from both side | Back left | Common.Door.Interior.Swing.Single | |
Pocket door | Back left | Common.Door.Interior.Pocket.Single | |
Double pocket door | Back left | Common.Door.Interior.Pocket.Double |
|
Sliding doors, often found in closet | Back left | Common.Door.Interior.Sliding.Double | |
Folding door |
Back left |
Common.Door.Interior.Folding.Single | |
Double folding doors | Back left | Common.Door.Interior.Folding.Double |
Windows
Short description of item |
Location of the insertion point in Design |
Code- Item type identified in the xml file |
Image |
Window | Back left | Common.Window | |
Sliding window | Back left | Common.Window.Sliding | |
Bay window | Back left | Common.Window.Architectural |
Structural Items
Short description of item |
Location of the insertion point in Design |
Code- Item type identified in the xml file |
The shape and direction of the item 0 degree |
Short description of item |
Stairs | Back left | Common.Structural.Stairs | ||
Square column | Back left | Common.Structural.Column |
Electric symbol
Short description of item |
Location of the insertion point in Design |
Code- Item type identified in the xml file |
Image |
Ceiling light |
Back left |
Common.Light.Ceiling | |
Junction Box | Back left | Common.Fixture.Electrical.JunctionBox | |
Electrical socket (duplex receptacle) | Back left | Common.Fixture.Electrical.Receptacle | |
Power switch | Back left |
Common.Fixture.Electrical.Switch |
Plumbing
Short description of item |
Location of the insertion point in Design |
Code- Item type identified in the xml file |
The shape and direction of the item 0 degree |
Image |
Faucet (hot and cold water supply) | Center | Common.Fixture.Plumbing | ||
Bath | Back left | Bathroom.Bath | ||
Shower | Back left | Bathroom.Shower.Enclosed | ||
Pedestal sink | Back left | Bathroom.Sink.Standard.Pedestal | ||
Toilet | Back left | Bathroom.Toilet | ||
Bidet | Back left | Bathroom.Bidet |
|
HVAC
Short description of item |
Location of the insertion point in Design |
Code- Item type identified in the xml file |
The shape and direction of the item 0 degree |
Image |
Air condition unit (window mounted) | Back left | Common.Appliance.AirConditioner | ||
Radiator (electric) | Back left | Common.Appliance.Radiator |
Furniture
Short description of item |
Location of the insertion point in Design |
Code- Item type identified in the xml file |
The shape and direction of the item 0 degree |
Image |
Kitchen base cabinet | Back left | Kitchen.Cabinet.Base.Standard.Rectangular | ||
Tall cabinet | Back left | Kitchen.Cabinet.Tall.Standard.Rectangular | ||
Wall cabinet | Back left | Kitchen.Cabinet.Wall.Standard.Rectangular | ||
Worktop, kitchen counter (rectangular) | Back left | Kitchen.Worktop | ||
Range (electric) | Back left | Kitchen.Appliance.Cooktop.Electric | ||
Refrigerator (two door, side by side) | Back left | Kitchen.Appliance.Refrigerator.Built-In.SideBySide | ||
Chair | Back left | Kitchen.Chair | ||
Table | Back left | Kitchen.Table |